CHMXM - 25800 3-CHLOROPERBENZOIC ACID

  • MSDS: CHMXM
  • Manufacturer: SIGMA CHEMICAL COMPANY
  • Product Name: 25800 3-CHLOROPERBENZOIC ACID
  • National Stock Number: 6850-00F056292
Product Identification

Product ID:25800 3-CHLOROPERBENZOIC ACID
MSDS Date:05/01/1996
FSC:6850
NIIN:00F056292
MSDS Number: CHMXM

Responsible Party
SIGMA CHEMICAL COMPANY
3050 SPRUCE ST
SAINT LOUIS, MO 63178-5000
US

Emergency Phone: 314-771-5765/800-325-3010

Info Phone: 314-771-5765/800-325-3010

Cage: 21076

Contractor
SIGMA CHEMICAL COMPANY
14508 ST LOUIS, MO 63178 US

Telephone: 314-771-5765

Cage: 21076

Ingredients

3-CHLOROPERBENZOIC ACID *98-2*

CAS: 937-14-4

RTECS: SD9470000


M-CHLOROBENZOIC ACID *98-2*

CAS: 535-80-8

RTECS: DG4975990

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE HARMFUL BY INHALATION,
INGESTION/SKIN ABSORPTION. EYES/SKIN: IRRITATION. INHALATION:
IRRITATING TO MUCOUS MEMBRANES & UPPER RESPIRATORY TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.

First Aid

First Aid:EYES: FLUSH W/COPIOUS AMOUNTS OF WATER FOR 15 MINS. SKIN:
WASH W/SOAP & COPIOUS AMOUNTS OF WATER. INHALATION: REMOVE TO FRESH
AIR. GIVE CPR/OXYGEN. INGESTION: WASH OUT MOUTH W/WATER IF
CONSCIOUS. OBTA IN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL POWDER/APPROPRIATE
FOAM.
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
MAY EXPLODE WHEN HEATED. HEATING MAY CAUSE AN EXPLOSION.

Accidental Release

Spill Release Procedures:WEAR SCBA, RUBBER BOOTS & HEAVY RUBBER GLOVES.
SWEEP UP, PLACE IN A BAG & HOLD FOR WASTE DISPOSAL. AVOID RAISING
DUST. VENTILATE AREA & WASH SITE AFTER MATERIAL PICKUP IS COMPLETE.

Handling

Handling and Storage Precautions:REFRIGERATE. KEEP AWAY FROM
COMBUSTIBLE MATERIALS/HEAT/SPARKS & OPEN FLAME. DON'T STORE
NEAR/ALLOW CONTACT W/CLOTHING/OTHER COMBUSTIBLE MATERIAL.
Other Precautions:KEEP TIGHTLY CLOSED IN A COOL WELL VENTILATED PLACE.
AVOID PROLONGED/REPEATED EXPOSURE. AVOID CONTACT & INHALATION.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:RUBBER
Eye Protection:CHEMICAL SAFETY GOGGLES
Other Protective Equipment:SAFETY SHOWER & EYE BATH.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
MELTING POINT: 156.6F-159.8F.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:(SEE SUPP)
Appearance and Odor:WHITE TO OFF-WHITE POWDER

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG BASES, STRONG REDUCING AGENTS, ORGANIC
MATERIALS.
Hazardous Decomposition Products:COMBUSTION: CO, CO2, HYDROGEN CHLORIDE
GAS.

Disposal

Waste Disposal Methods:CONTACT A LICENSED PROFESSIONAL WASTE DISPOSAL
SERVICE IAW/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.